24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

24 valve cutting out, need help

Old May 16, 2010 | 05:16 PM
  #1  
guroo987's Avatar
Thread Starter
|
Diesel Fan
Joined: Mar 2007
Posts: 61
Likes: 13
From: fallon, nv
Default 24 valve cutting out, need help

been a while but here goes.
lost injection pump at 129,000, bought special x from blue chip, installed with no problems, fired it up and idled perfect, let it warm up and took for a test drive and it was cutting out at all rpms except at idle. now when i say cutting out it would just die for a milisecond and come right back, perty violently. called chip and he said it is a apps problem cause it doesnt do it at idle, only when the apps goes into closed loop. he suggested i check the connections, i did and they were all good. problem went away i thought until i took it on a 400 mile trip and it did it about 20 times cruising at 75 mph. next day no problem again. about 2 weeks go by and it is back at all rpms again but intermitent. never had a prob until changed IP. recalibrated apps and it was way out of range, within .01 volt now with no change. today whwn it acted up it was doing it at idle in gear to but not in neutral. fuel press is always between 16-13. does it with chip on or off. IP does have one of chips stelth covers on it. ANY HELP APPRECIATED!!! THANKS IN ADVANCE!!! AND NO CODES!!!
 
Reply
Old May 16, 2010 | 05:23 PM
  #2  
Diesel Dawgs Performance's Avatar
Joined: Mar 2007
Posts: 14,546
Likes: 843
From: Western NC
Default

Could still be a APPS issue.
 
Reply
Old May 16, 2010 | 06:08 PM
  #3  
guroo987's Avatar
Thread Starter
|
Diesel Fan
Joined: Mar 2007
Posts: 61
Likes: 13
From: fallon, nv
Default

it seems like an apps issue but it is hard for me to buy a new one when there was no problem there before the new injection pump
 
Reply
Old May 17, 2010 | 07:32 PM
  #4  
guroo987's Avatar
Thread Starter
|
Diesel Fan
Joined: Mar 2007
Posts: 61
Likes: 13
From: fallon, nv
Default

anybody???
 
Reply
Old May 19, 2010 | 10:50 PM
  #5  
jkidd's Avatar
Diesel Bombers Sponsor
Joined: Jan 2008
Posts: 1,100
Likes: 77
From: Kaysville UT
Default

Any codes? If you need a new apps or tps don't buy it at the dealer. you can get them for less than $200.
 
Reply
Old May 20, 2010 | 07:07 AM
  #6  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

How about your Cam sensor or wiring to it? Tricky little devil hides behind the VP, so it is hard to test. I don't suppose you changed the sensor when the P was removed?
 
Reply
Old May 20, 2010 | 09:26 PM
  #7  
guroo987's Avatar
Thread Starter
|
Diesel Fan
Joined: Mar 2007
Posts: 61
Likes: 13
From: fallon, nv
Default

no i did not change the sensor. and there are NO CODES
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RA113024
Ford 83-94 6.9 and 7.3L General
3
Mar 13, 2016 07:42 PM
jeremiah1
5.9 Liter CR Dodge Cummins 03-07
0
Jul 21, 2015 06:35 PM
LTreis702
Chevy/GMC 6.2L and 6.5L
4
Feb 14, 2015 12:52 PM
bonestock
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
Feb 1, 2015 08:41 PM
woodsman27
12 Valve 2nd Gen Dodge Cummins 94-98
5
Oct 26, 2014 02:13 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:57 PM.