Whats up wit me and my truck
Thread Starter
|
Diesel Wrench
Joined: Sep 2009
Posts: 585
Likes: 10
From: Louisville, KY
ok i looked every thing is tight the only thing i saw wrong was 1 of the 4 bolts that hold the trans itself to the bracket look like it was over tightend it cracked the trans right were the threads are the trans housing it self is ok and its prbly been like this for aawhile or 6 months since the trans shop[ had my truck will this be a big problem or is there a way to fix it
---AutoMerged DoublePost---
its the passenger rear bolt the other 3 bolts are nice and tight
and the mount looks good
---AutoMerged DoublePost---
its the passenger rear bolt the other 3 bolts are nice and tight
and the mount looks good
Last edited by NCFPD; Jan 6, 2010 at 03:45 PM. Reason: Automerged Doublepost
Diesel Bomber
Joined: Nov 2009
Posts: 1,058
Likes: 53
From: Sanford, Colorado
Ok well not too sure then and as for the cracked trans as long as its the rest of the bolts are tight and nothing is crooked or tweeked in anyway should be alright i would just keep a eye on it though. As for the vibs not sure bout that now if every thing else looks good.
Thread Starter
|
Diesel Wrench
Joined: Sep 2009
Posts: 585
Likes: 10
From: Louisville, KY
na its the bolts that hold the bross member plate to the bottom of the trans and the vib is kinda a high freq. the flex plate should be fine its about 5 months old and is sfi approved I have no idea what could be wrong its kinda like if a drive shaft was vibrating but it gets worse when in over drive lugging up a hill but it seems ok i cant find nothing wrong with anything sept that one trans crossmember bolt and that could had been there for awhile bec. i had my trans worked on about 5 months ago it runs drives shifts fine could maybe a wieght or somthing fell off the drive shaft
---AutoMerged DoublePost---
Maybe its justme i have been under more stress than ever
---AutoMerged DoublePost---
Maybe its justme i have been under more stress than ever
Last edited by NCFPD; Jan 6, 2010 at 06:18 PM. Reason: Automerged Doublepost
Diesel Wrench
Joined: Apr 2009
Posts: 562
Likes: 34
From: Brownsville, Oh
Just wondering if you ever figured anything out on your truck, mine and another guy are haveing a similar problem with our trucks, they are both ext. cab short bed, 5 spd, with leveling kits, the porblem is worst when towing up a hill, while I have even noticed it going down hill with a load, and mine does it empty just maintaining speed on flat ground even, every thing from the flywheel to the rear end has been rebuilt on my truck in the last 6 month as well. We just have no idea what it could be?
