Computer Overhead
#1
Computer Overhead
On occation on my overhead display it will show CCD. From a search it appears to be Chrysler's Collision Detection. Not sure what it means or how to get rid of it. Also on occation my display will dim at random without me even touching it as I drive down the road. Anyone have any experience with this or advice on how to clear this?
Thanks
Thanks
#2
I have CCD appearing as well, and have heard that the overhead module can fail and display that. When I first got the truck it had CCD, I unplugged the module and it went away, for a while. It is back again, and I have been unable to clear it in anyway.
---AutoMerged DoublePost---
Found this on the net:
This is out of the 2001 service manual. It may help you find out whats up.
SELF-DIAGNOSTIC TEST
A self-diagnostic test is used to determine that the
compass mini-trip computer module is operating
properly electrically. Initiate the self-diagnostic test
as follows:
(1) With the ignition switch in the Off position,
simultaneously depress and hold the Step button and
the U.S./Metric button.
(2) Turn the ignition switch to the On position.
(3) Continue to hold both buttons depressed until
the compass mini-trip computer module enters the
display segment test. In this test, all of the Vacuum
Fluorescent Display (VFD) segments are lighted
while the compass mini-trip computer module performs
the following checks:
² Microprocessor RAM read/write test
² Non-volatile memory read/write test
² Microprocessor ROM verification test
² CCD communications test.
(4) Following completion of these tests, the compass
mini-trip computer will display one of three
messages: “PASS,” “FAIL,” or “CCd.” Respond to the
respective test results as follows:
² If the “PASS” message is displayed, but compass
mini-trip computer operation is still improper, the
use of a DRB scan tool and the proper Diagnostic
Procedures manual are required for further diagnosis.
² If the “FAIL” message is displayed, the compass
mini-trip computer module is faulty and must be
replaced.
² If the “CCd” message is displayed, the use of a
DRBt scan tool and the proper Diagnostic Procedures
manual are required for further diagnosis.
² If any VFD segment should fail to light during
the display segment test, the compass mini-trip computer
module is faulty and must be replaced.
(5) If all tests are passed, or if the ignition switch
is turned to the Off position, the compass mini-trip
computer module will automatically return to normal
operation.
---AutoMerged DoublePost---
Found this on the net:
This is out of the 2001 service manual. It may help you find out whats up.
SELF-DIAGNOSTIC TEST
A self-diagnostic test is used to determine that the
compass mini-trip computer module is operating
properly electrically. Initiate the self-diagnostic test
as follows:
(1) With the ignition switch in the Off position,
simultaneously depress and hold the Step button and
the U.S./Metric button.
(2) Turn the ignition switch to the On position.
(3) Continue to hold both buttons depressed until
the compass mini-trip computer module enters the
display segment test. In this test, all of the Vacuum
Fluorescent Display (VFD) segments are lighted
while the compass mini-trip computer module performs
the following checks:
² Microprocessor RAM read/write test
² Non-volatile memory read/write test
² Microprocessor ROM verification test
² CCD communications test.
(4) Following completion of these tests, the compass
mini-trip computer will display one of three
messages: “PASS,” “FAIL,” or “CCd.” Respond to the
respective test results as follows:
² If the “PASS” message is displayed, but compass
mini-trip computer operation is still improper, the
use of a DRB scan tool and the proper Diagnostic
Procedures manual are required for further diagnosis.
² If the “FAIL” message is displayed, the compass
mini-trip computer module is faulty and must be
replaced.
² If the “CCd” message is displayed, the use of a
DRBt scan tool and the proper Diagnostic Procedures
manual are required for further diagnosis.
² If any VFD segment should fail to light during
the display segment test, the compass mini-trip computer
module is faulty and must be replaced.
(5) If all tests are passed, or if the ignition switch
is turned to the Off position, the compass mini-trip
computer module will automatically return to normal
operation.
Last edited by RAW; 01-02-2010 at 09:51 PM. Reason: Automerged Doublepost
#5
Thread
Thread Starter
Forum
Replies
Last Post
grecy
Diesel Engine Conversions
6
10-30-2017 08:00 AM
Tkitt21
24 Valve 2nd Gen Dodge Cummins 98.5-02
3
01-06-2015 07:33 AM
IslanderXJ
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
12-17-2014 04:14 PM