then put the snap ring back in place?

 

no leave it out

 

ok thanks guys. you know of any other little tricks like this i could do to the truck

 

Here is my small write up on it...
Silencer Ring

Here is a silencer ring and snap ring...



Your going to need two small flat screwdrivers to pry the snap ring out of the groove. As you see in the top picture one side has a tip that you can pry against.


Once the snap ring is out just tip the silencer ring out.


Remember removing the silencer ring will not improve performance at all. There is no gain in horse power or torque numbers. This has been tested on a dyno and no improvements have been found from removing the silencer ring.
But you will notice a whistling noise as the turbo spools up... Thats it!

 

this, combined with the BHAF, will get heads turnin!

 

...and a decent helping of right foot!

 

Before



After



You'll love it !!

 

I just did it and it is the best spent 5 min. of your life... well with your pants on

 

thanks guys. i removed mine and yeah it gets heads turnin. there is no bad effects of takin the ring out right?

 

nope. as lond as you did not leave a tool in there.