24v Won't Start!
Newbie
Joined: Jul 2018
Posts: 9
Likes: 0
From: Washington
Update: While the tuner was fried, that wasn't the actual problem. There was a fuse hidden up under the dash behind the gauges that popped. This fed pin 5 on the ECM. Once I gave it power again, it started right up.
Newbie
Joined: Feb 2019
Posts: 1
Likes: 0
Yes, it turned out to be my PCM. If you have access to another 2nd gen VP truck you can swap the pcm's temporary and see if your truck will start . My truck is a 2000 6spd and I used the PCM out of a 2000 auto and it started right up. So I just ordered a new pcm and haven't had any issues since.
I had another truck with nearly the same issue at the same time and that truck's problem was there was a broken wire in the main harness.
I would look at your crank and cam sensors possibly as well. Just out of curiosity let me know what it turns out to be!
I had another truck with nearly the same issue at the same time and that truck's problem was there was a broken wire in the main harness.
I would look at your crank and cam sensors possibly as well. Just out of curiosity let me know what it turns out to be!
Thread
Thread Starter
Forum
Replies
Last Post
Airbornecookie
Ford Powerstroke 03-07 6.0L
3
Jul 1, 2016 01:10 PM
timsgsx
24 Valve 2nd Gen Dodge Cummins 98.5-02
32
Aug 25, 2010 05:29 PM
