24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

Lift pump pass though?

Thread Tools
 
Search this Thread
 
  #1  
Old 03-07-2017, 08:23 PM
Motohead1's Avatar
Newbie
Thread Starter
Join Date: Mar 2017
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default Lift pump pass though?

So I have 2002 in tank lift pump and was wondering what the little H connector is for that ties the return and pressure lines?

Is there a way to make this lift pump a pass through in case the electric pump fails?
 
  #2  
Old 03-14-2017, 05:01 AM
gh0stman's Avatar
Diesel Wrench
Join Date: Jun 2014
Posts: 842
Received 65 Likes on 62 Posts
Default

To run anyother lift pump you will need a draw straw or a sump. Trying to pull through a dead or dieing pump will cause a restriction in pressure.
 
  #3  
Old 03-15-2017, 05:23 PM
Motohead1's Avatar
Newbie
Thread Starter
Join Date: Mar 2017
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Do you know what that "H" connector between the feed and return is for?
 
  #4  
Old 03-16-2017, 04:28 AM
gh0stman's Avatar
Diesel Wrench
Join Date: Jun 2014
Posts: 842
Received 65 Likes on 62 Posts
Default

I do not..
 
  #5  
Old 03-16-2017, 06:17 PM
Motohead1's Avatar
Newbie
Thread Starter
Join Date: Mar 2017
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Looks like its a FPR that pops around 5-9psi.
 
  #6  
Old 03-17-2017, 04:35 AM
gh0stman's Avatar
Diesel Wrench
Join Date: Jun 2014
Posts: 842
Received 65 Likes on 62 Posts
Default

I wouldn't run it that low. Bosch specs it for a minimum of 10 psi. Personally I wouldn't do less than 14 psi. I wouldn't run it. I'd park it till you get the fuel pressure sorted.
 
  #7  
Old 03-17-2017, 07:09 PM
Motohead1's Avatar
Newbie
Thread Starter
Join Date: Mar 2017
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

I am running a TDi ALH in my 2001 dakota. It has an 11mm VE pump and originally ran on a straw. I added a lift pump cause its not stock.
 




All times are GMT -5. The time now is 07:00 PM.