24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

Automatic door locks spazzing out

Old Oct 21, 2016 | 12:36 PM
  #1  
samiam2714's Avatar
Thread Starter
|
Newbie
Joined: Jan 2016
Posts: 2
Likes: 0
Default Automatic door locks spazzing out

Alright, my first ever post on here. First off I have a '02 cummins 2500.

My problem is when the ignition switch is on the doors are locking on their own. Not rhythmically the relay just goes off. It also seems to happen when I roll the window down as well.

It is not the remote i pulled the plug on tuat to test it first. I checked the fuse as well.

I have not yet had the dash board apart in this thing so if someobe could link me to a video or diagram or tutorial id appreciate it.
 
Reply
Old Oct 23, 2016 | 02:41 PM
  #2  
kerley's Avatar
Diesel Enthusiast
Joined: Aug 2010
Posts: 268
Likes: 7
From: Montgomery, Alabama
Default

Originally Posted by samiam2714
Alright, my first ever post on here. First off I have a '02 cummins 2500.

My problem is when the ignition switch is on the doors are locking on their own. Not rhythmically the relay just goes off. It also seems to happen when I roll the window down as well.

It is not the remote i pulled the plug on tuat to test it first. I checked the fuse as well.

I have not yet had the dash board apart in this thing so if someobe could link me to a video or diagram or tutorial id appreciate it.
I just compleated the repair of my window/door locks on my 1998.24v. what I discovered is that all power for windows and locks goes through the driver's side master control switch. The windows are on a separate fuse but the master switch is the key. The dealer wants 60$ but RockAuto about 25=-$.as I disassembled the drivers door I could see that the track was severely worn so I replaced everything.
 
Reply
Old Oct 23, 2016 | 08:30 PM
  #3  
mpcampers's Avatar
Diesel Fan
Joined: Jun 2014
Posts: 83
Likes: 2
From: Iowa
Default

nice to know..!!
 
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:23 PM.