Mid or high tensile I wouldn't spend the extra 5-600 dollars on the high tensile but that your call on how safe you want to be but mids handle 70 on my 06 for 50 k so far you shouldn't have a problem just follow the torque sequence ( should come with the studs ) to a tee. And depending how big of injectors you have if stock or even 125s you really don't want to go past 45 anyways 50 max

 

I bet you have to run alot of NOS to clean up that large of an injector... What size are they, i have 5x.035s in mine to my knowledge they are the biggest out there....

 

i have 150 edge injectors thats all i know man i ordered some mid arp studs im not looking to hit no 90 psi i want it to run good but be reliable

 

I have a 72 mm small turbo and a 109 mm big sent the truck to garret had them build those for me then sent the truck to industrial and told them make it run so to be honest idk I do know it smokes like ***** Nelson and takes a while to spool but with a set of custom brembo brake system I can spool to about 130 psi before I leave the line at which point the 24 in wide slicks all fours wheels ( which I soak in hot lap) takeover then when she shifts to second I hit the one red button and when she goes to fourth I bang it back into 2wd . sometime it breaks the tires loose and twice so far it just destored the transfer case. But the cage the dash and the ice to water cooler pretty much the rest me and my mechanic built and she's p-pumped so to answer your question I can't I only asked how much to put on the check I could call tomorrow and found out tho

---AutoMerged DoublePost---

Yea I don't blame ya my daily drive only has 60 hp inj and a 62mm under a 72mm running about 68 it's nice to know hey this truck will run everyday and at 758 hp it's pretty peppy I would hate driving my 04.5 or 02 everyday but just follow the torque sequence and you'll never have another prob

 

130psi boost off the line... LMMFAO


Luke

 

Dude **** off do I really need to haul it out their I mean come on with big enough brakes it won't move no matter high much boost about 130 I'm praying but it does it thought about doing even bigger brakes but that enclose going bigger than an 18 in rim look I don't give a **** what you think I don't go live in your little fairy land of 90 lbs if it blow ill build another I push the truck to the limit and then in say another year somebody's gonna run a faster time I put another 10 20 k in it IDc I'm at the point where I'm thinking about building a straight up drag car with a cummins in it I can't make this thing any faster I can't if you know please say on wait that's right you think it's a ****** unicorn ok my dad once said ( he was a billionaire ) if they say its impossible that just means it takes more money dude it's bore over so far the ******* block is still glowing When I make it back to the trailer I can't make it faster at thing point all I can do is make it lighter

 

Are u done? Your posts are making me sleepy


Luke

 

No need to haul it anywhere......Take a video and post it.

 

Rofl what a fool!

Sent from my DROID RAZR using Tapatalk 2

 

Ok as soon as its back together I will post a video it's dosent hook up as good on the street but its still a rocket