head gasket?
#1
head gasket?
seen coolant all under my truck i traced it up to the corner or i think head gasket on pass side right above where the oil filter goes has nayone else seen this is it the gasket weeping on the corner or??? and how hard is it to take head off so i can get it decked and new arp studs n gasket??? i work on cars but ive never had a head off a cummins thanks guys!!!!
#4
it happens but pretty rare , i would clean it up and put some pressure test the system and verify exactly where the leak is spawning from
doing the head on a cummins is crazy easy although i would get help cause its pretty heavy and service information actually tells you to use a hoist to lift it
good luck
scott
doing the head on a cummins is crazy easy although i would get help cause its pretty heavy and service information actually tells you to use a hoist to lift it
good luck
scott
#8
well i drove it 300 miles today and had no leaks??? it doesnt over heat or anything stay at about 190ish and i only boost 32psi nothing crazy fire ring it do i have to just get head ringed or block to im looking to just get stock head gasket with arp studs??? i heard you onyl want to use stock head gasket no aftermarket ones, ill have to clean it up tomorrow and see if i see it leaking and pressure test it
oh and i noticed it may look like coming out of that little 3/8s plug and fan blowing it over on the side
oh and i noticed it may look like coming out of that little 3/8s plug and fan blowing it over on the side
#9