High idle and 3 cyl idle
#1
High idle and 3 cyl idle
I took my truck to the dealer and asked about getting the high idle enabled and also the 3 cylinder idle as well.
The truck is a 99 with 140 miles on it.
Has an edge juice box with edge, 4 inch stainless exhaust and bla bla bla. You get the idea.
I copied out the flash number and printed off everything.
Took it all to the dealer. Showed the service advisor the paper work. First mechanic had no idea about any of it. Second mechanic (their diesel guy) has done many of the same already and was familiar with it all. Sure.
1 hour and 169 bucks later I have no high idle but subosedly have the 3 cylinder idle.
Wouldn't think thats possible but sometimes it take a bit to learn things I guess.
And I learned my lesson.
I never thought to ask here if a cummins dealer could do this instead.
Regards Chris
The truck is a 99 with 140 miles on it.
Has an edge juice box with edge, 4 inch stainless exhaust and bla bla bla. You get the idea.
I copied out the flash number and printed off everything.
Took it all to the dealer. Showed the service advisor the paper work. First mechanic had no idea about any of it. Second mechanic (their diesel guy) has done many of the same already and was familiar with it all. Sure.
1 hour and 169 bucks later I have no high idle but subosedly have the 3 cylinder idle.
Wouldn't think thats possible but sometimes it take a bit to learn things I guess.
And I learned my lesson.
I never thought to ask here if a cummins dealer could do this instead.
Regards Chris
#3
#4
#6
Get a 39k ohm resistor and stick it in the iat sensor plug and the high idle will start after about a min. You cant have 3 cyl high idle with having reg high idle. I built my own kit to run the high idle or 3 cly anytime by flipping a few switches. Honestly for the price you didnt get a deal on that one. You can enable it with a smarty also. I called around looking to find a cheap price to get mine enabled and the cummins place couldnt do it for the fact its a chrysler ecm.
#7
Get a 39k ohm resistor and stick it in the iat sensor plug and the high idle will start after about a min. You cant have 3 cyl high idle with having reg high idle. I built my own kit to run the high idle or 3 cly anytime by flipping a few switches. Honestly for the price you didnt get a deal on that one. You can enable it with a smarty also. I called around looking to find a cheap price to get mine enabled and the cummins place couldnt do it for the fact its a chrysler ecm.
#8
Started it this morning and it was just cold enough for it to go to the high idle, which it did.
The wife was very surprised, and I was pleased.
When its gets colder I think the 3 cyl idle will run too.
I called the shop today and told the service lady that it did indeed work and that I would be in to buy the technician a coffee. He did seem concerned that he couldn't get it in.
So all in all I am pleased with the "upgrade" .
Regards Chris
The wife was very surprised, and I was pleased.
When its gets colder I think the 3 cyl idle will run too.
I called the shop today and told the service lady that it did indeed work and that I would be in to buy the technician a coffee. He did seem concerned that he couldn't get it in.
So all in all I am pleased with the "upgrade" .
Regards Chris
Thread
Thread Starter
Forum
Replies
Last Post
john grossman
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
01-12-2019 08:58 PM
CumminsCoalRoller24/7
5.9 Liter CR Dodge Cummins 03-07
5
02-21-2015 10:44 PM