ve pump banjo fix?
#1
#3
I used 1/4" od nylon air brake tubing and the intake side is a 1/8" NPT 90* elbow and afc side is a straight fitting 1/16"NPT both fittings are push lock style. Just make sure you have a clean straight cut on the tubing before sliding it in and should not have any leaks. Had an extra fitting on the afc side because of limited parts available, cleaned up now just dont have an updated pic.
---AutoMerged DoublePost---
http://s1162.photobucket.com/albums/q538/ricet07/
---AutoMerged DoublePost---
http://s1162.photobucket.com/albums/q538/ricet07/
Last edited by ricet07; 03-02-2012 at 07:18 PM. Reason: Automerged Doublepost
#4
thats the exact setup i was looking for.thanks.seems pretty simple to do and parts should be more available than the banjo setup....i got my banjo bolt in from ofi.com and i got overnight shipping,which took 5 days to get here,then they sent the wrong one.so i prob gonna try a different setup.thanks
Thread
Thread Starter
Forum
Replies
Last Post
HardLuck
Diesel In Distress - Support Ticket
0
06-24-2015 08:04 AM
Renteria1217
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
04-16-2015 11:38 PM