BIG PROBLEM.................
Ok I got oil running out of my bell housing..... Like pouring out! Out of the little slit at the bottom.... Any ideas? I'm thinkin crankshaft seal or freeze plug idk
---AutoMerged DoublePost---
It's a 1992 W350 5-speed by the way
---AutoMerged DoublePost---
It's a 1992 W350 5-speed by the way
Last edited by flyingcrodeo; Jan 17, 2012 at 08:36 PM. Reason: Automerged Doublepost
There's a soft plug in the back of the block for the cam, but the engine adapter plate covers it up, new 5.9 adapter plates are actually o-ringed and the soft plug is non existent.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Yeah it POURED out while i was in town so i limped it to my shop i use walked in threw them the keys and said oil leak fix it and left. Well they called me the next mornin and said it was the rear valve cover gasket and it had busted in the back by the fire wall and they said it must of ran down the back and looked like it was coming out of the bell housing but i swore it was. Can it get in there from the top??? Then come out? And i would check the trans but its a 5 speed get rag and its a b*tch to check and then fill back up.
YEA if the rear valve cover busts it can run down the back of the blcoj and look like a rear main, to bad you gonna have to pay em to fix that
40 bucks for all the seals and a 15 or 20MM wrench and five minutes you wouldve had it fixed
40 bucks for all the seals and a 15 or 20MM wrench and five minutes you wouldve had it fixed
Yeah it's been leakin but I never seen it coming out of the valve cover and it has been goin down the back thaught it was the oil pan but i guess it just finally busted and ran down there. But didnt know it could get into the bell housing like that?
There opening in the bell housing to keep the Fly wheel and flec plate cool and keep dust out kinda.
So can it get in at the top? jw it probly never came out of it just ran along the bottom of the bell housing and hit the opening and then dripped off and to the ground idk i was just pissed and didnt look at it really good.
HAHA i wouldent know for sure unless I looked at it myself.
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
Feb 7, 2023 01:15 AM
jeremy01995
12 Valve 2nd Gen Dodge Cummins 94-98
1
Sep 14, 2015 06:34 PM
Diesel Bombers
Latest Automotive Industry News
0
Jun 4, 2015 08:40 AM
Diesel Bombers
Latest Automotive Industry News
0
Oct 26, 2014 06:20 PM



