need help building a air intake
Thread Starter
|
Diesel Fan
Joined: Dec 2011
Posts: 41
Likes: 1
need help building a air intake
i got in mind what i wanna do i have seen some pics on here from some that guys have made and they look sweet. no i wanna build my own but i aint sure what i need. could some one help me out thanks.
Diesel Wrench
Joined: Apr 2010
Posts: 510
Likes: 32
From: Texas Panhandle
Here's my set up
. Its an intercooled but I think you may be able to do the same setup. I also have some 3" holes drilled underneath it for more airflow. Works good, lowered my egt's about 100f
. Its an intercooled but I think you may be able to do the same setup. I also have some 3" holes drilled underneath it for more airflow. Works good, lowered my egt's about 100f
Last edited by white93; Dec 20, 2011 at 09:22 AM.
Diesel Enthusiast
Joined: Jul 2010
Posts: 234
Likes: 39
From: Pittsburg ILL
Here is what i did.
for the pipe i used a piece of aluminized exaust and polished it, here is where to get the boots.
AIR FLOW SYSTEMS INC.
then here is how to do it.
Basic Turbo Intake Tube Upgrade Guide - Dodge Diesel - Diesel Truck Resource Forums
Dar
for the pipe i used a piece of aluminized exaust and polished it, here is where to get the boots.
AIR FLOW SYSTEMS INC.
then here is how to do it.
Basic Turbo Intake Tube Upgrade Guide - Dodge Diesel - Diesel Truck Resource Forums
Dar
Diesel Enthusiast
Joined: Apr 2011
Posts: 456
Likes: 28
From: Argyle,WI
You can use a piece of flat stock and bend a 90 on each end, with a hole drilled in one of the ends. Then stick one end under the band clamp on the filter and bolt the other side to your inner fender or wheel well.
Diesel Fan
Joined: Jun 2010
Posts: 55
Likes: 4
From: Charles Town, WV
2 4" 45 degree elbows welded together and a straight 4" coupler plus a sheet of aluminum
The best part is it gives a nice flat place to stick tools and such
The best part is it gives a nice flat place to stick tools and such
Last edited by Gots_a_sol; Jan 12, 2012 at 10:07 PM. Reason: Automerged Doublepost
