Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   1st Generation Dodge Cummins 89-93 (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/)
-   -   need help building a air intake (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/88128-need-help-building-air-intake.html)

redneck512 12-19-2011 10:24 PM

need help building a air intake
 
i got in mind what i wanna do i have seen some pics on here from some that guys have made and they look sweet. no i wanna build my own but i aint sure what i need. could some one help me out thanks.

tower_ofpower 12-19-2011 11:07 PM

3" exhaust pipe works quite well. I bought a mandrel bent 90 from summit racing and used some 3/8 plate steel for the flange.


Sent from my iPhone using Tapatalk

white93 12-20-2011 09:18 AM

Here's my set up
http://i1113.photobucket.com/albums/...7/IMAG0032.jpg. Its an intercooled but I think you may be able to do the same setup. I also have some 3" holes drilled underneath it for more airflow. Works good, lowered my egt's about 100f

ricet07 12-20-2011 09:21 AM

Should be able to pick up a 45 with silicone boot and 1-2' pipe from a local parts store for around 30 bucks.

1STGENFARMBOY 12-20-2011 10:25 AM

1 Attachment(s)
Here is what i did.

Attachment 39545


for the pipe i used a piece of aluminized exaust and polished it, here is where to get the boots.

AIR FLOW SYSTEMS INC.

then here is how to do it.

Basic Turbo Intake Tube Upgrade Guide - Dodge Diesel - Diesel Truck Resource Forums

Dar

tower_ofpower 12-20-2011 11:31 AM

I retract my previous post... For what ever reason I was thinking the piping to the engine


Sent from my iPhone using Tapatalk

sotomo 01-10-2012 04:05 PM

whats the diameter and the length of that pipe and what did you use for your air filter to stay sturdy i spent like 80 bucks ona KNN filter and dont wanna try and buy any other to make it work

ricet07 01-11-2012 09:10 AM

You can use a piece of flat stock and bend a 90 on each end, with a hole drilled in one of the ends. Then stick one end under the band clamp on the filter and bolt the other side to your inner fender or wheel well.

johnnyreb 01-11-2012 12:30 PM

I built the BHAF plate. Then cut my stock tube down and installed a piece of 5" aluminum irrigation pipe on it. sort like 1stgenfarmboys only cheaper.

Gots_a_sol 01-12-2012 10:06 PM

2 4" 45 degree elbows welded together and a straight 4" coupler plus a sheet of aluminum

http://i14.photobucket.com/albums/a3...e/IMAG0149.jpg

http://i14.photobucket.com/albums/a3...e/IMAG0150.jpg

http://i14.photobucket.com/albums/a3...e/IMAG0157.jpg

The best part is it gives a nice flat place to stick tools and such


All times are GMT -5. The time now is 12:02 PM.


© 2024 MH Sub I, LLC dba Internet Brands