Rear wiring harness
#11
Rear wiring harness
Has rear abs, wiring for abs is before the cut. It has two reverse wires bc of a splice made further up for left an right reverse lights. I think it has two grounds... I might have it figured out. I'll double check the wire color tomorrow.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
#12
#13
One of the wires to the rear is actually the ground for the tank sender. The ground splices on the rear somewhere and then goes forward to the tank. I cut my harness off after the abs split and I lost the fuel gauge. Tracked down the wire and its all good. Kinda scratched my head on that one.
#14
Rear wiring harness
See richie, I thought the same exact thing for the tank ground. I did the same thing on my 84. Thank you for the help terra, some of the wires you're right on. The purple/black are reverse, and the black/yellow is marker lights. Your turn signals are the same as your brake lights. I'm thinking i'm just gonna hook all the grey wires together and that'll take
Care of everything, I am however going to get accurate wire colors and do a quick write up for others future reference on here.
Sent from my iPhone using Tapatalk
Care of everything, I am however going to get accurate wire colors and do a quick write up for others future reference on here.
Sent from my iPhone using Tapatalk
#15
Rear wiring harness
well this is the finished product,
Wire quantity is posted last
Black/yellow- marker lights (1)
Purple/black- reverse lights (2)
Grey- ground (3)
DarkGreen/brown- left turn (1)
Brown/light green- right turn (1)
Both turn signal wires are energized for stop.
Total of 5 purposeful wires
Total of 8 wires in the factory harness if it were to be cut right behind the Rear ABS unit. Hope this makes it to a sticky, or atleast helps someone out.
Sent from my iPhone using Tapatalk
Wire quantity is posted last
Black/yellow- marker lights (1)
Purple/black- reverse lights (2)
Grey- ground (3)
DarkGreen/brown- left turn (1)
Brown/light green- right turn (1)
Both turn signal wires are energized for stop.
Total of 5 purposeful wires
Total of 8 wires in the factory harness if it were to be cut right behind the Rear ABS unit. Hope this makes it to a sticky, or atleast helps someone out.
Sent from my iPhone using Tapatalk
The following users liked this post:
terragota5.9cummins (05-11-2011)
#16
forgot about reverse lights
---AutoMerged DoublePost---
forgot about reverse lights
that box is the wat to do it that will keep out the elements
---AutoMerged DoublePost---
will save me a sometime when i get my son truck back together will be putting on a flatbed .
---AutoMerged DoublePost---
forgot about reverse lights
that box is the wat to do it that will keep out the elements
---AutoMerged DoublePost---
will save me a sometime when i get my son truck back together will be putting on a flatbed .
Last edited by terragota5.9cummins; 05-11-2011 at 09:50 PM. Reason: Automerged Doublepost
#17
Looks great and thanks for the help. I used this when I was looking into wiring in a new hitch. After looking at it, I too want to get rid of the hodge podge from previous owner and get it all done right. What specific junction box did you use? Id like to wire mine up similarly.
Thanks again!
Thanks again!
Thread
Thread Starter
Forum
Replies
Last Post
Mike H
12 Valve 2nd Gen Dodge Cummins 94-98
1
11-25-2014 03:13 PM
Powerplant95
Dodge Truck and Cummins Turbo Diesel Forum
1
10-16-2014 03:31 PM