1st gen diesel
#11
![Default](https://www.dieselbombers.com/images/icons/icon1.png)
Attn: Tanner please see avatar LMAO
---AutoMerged DoublePost---
ok Pyromoter it reads on how hot the exhaust gas gets anymore that 1250 for more than a few seconds you risk melting your motor not good but when I race or pass someone in the 3rd lane I can see 1600+ but its only for 2-3 seconds MAX
Drill and tap your manifold for a 1/8in pipe thread and find the center of the manifold right next to the turbo and go back about 1/8in towards the fire wall let me see if I have a pic
---AutoMerged DoublePost---
---AutoMerged DoublePost---
Drill and tap your manifold for a 1/8in pipe thread and find the center of the manifold right next to the turbo and go back about 1/8in towards the fire wall let me see if I have a pic
---AutoMerged DoublePost---
![Name: pyro.jpg
Views: 172
Size: 47.2 KB](https://www.dieselbombers.com/attachments/1st-generation-dodge-cummins-89-93/43695d1501298864-1st-gen-diesel-pyro.jpg)
Last edited by big bad diesel 416; 01-06-2011 at 12:30 AM. Reason: Automerged Doublepost
The following 2 users liked this post by big bad diesel 416:
1stgen350 (01-07-2011),
BIGREDGOAT (01-06-2011)
#12
![Default](https://www.dieselbombers.com/images/icons/icon1.png)
alrite cool thanks man what should i do now, that its all tapped and fitted and wired its been like 0 - to about -1 where im livin, and se hasnt been on the road for long and i put a permit on and everytime i put my foot into it my throttle sticks, if i give my pedal a little kick it pops out and goess back, theres a little plastic wre cover on my throttle wire, and were it meets the injector pump theres a metal sleeve the the wuire goes into could the plastic aorund the wire be catching on the metal sleeve??
#13
#14
#15
Thread
Thread Starter
Forum
Replies
Last Post
Cdog121
1st Generation Dodge Cummins 89-93
6
11-16-2015 01:49 PM