1st gen diesel
 

hey i got a 1990 d-250 2wd 5.9 litrer non I/C, bone stock, wondering if someone had some easy instructions on how to turn up my starwheel for more power, and also i want a lil bitta black to what do i do?? its fairly easy ive been told but some help would bne nice thank you:c:

There are sticky's (or useful threads) at the top of the first gen section. I would advise doing more than just the starwheel. Turn your fuel pin, adjust your full power screw, turn the smoke screw and you can also turn the star wheel. And just a word of advice, NEVER EVER ask for smoke. You will get raped on here. :ouch: Welcome to the forum and best of luck to ya! :tu:

Gauges man, gauges. You will come to find out that those things (gauges) will be a life saver. You will need at minimum a pyrometer and boost. If you have an auto a transmiSsion tempature gauge will be good to have. After you get the gauges installed look in the sticky. And just like noted above, smoke=raping. Build for power. Smoke will come along. :jump:

haha alrite boys thanks, im not sure what you mean by the stickys? and i got a stock auto tranny, i just want her to have some bad ass top end to go with the bottom just loud and deep soundin

---AutoMerged DoublePost---

ive seen a few videos, but i dont know whewre the ful power screw is, i wanna take the top off of the pump but im not sure if i put the pin in wrong if my truckss fucked or what ya know

No it won't be screwed up. But I suggest gauges before tweaking. And PS. Watch the cussing before the admins get ya dude

thats a good thing until you get gauges a pyro at least

Yep! Listen to Brice! The man knows his first gens! :w2: haha

Thanks man thats my specialty ;)

alrite first things first where do i gotta tap fto put in the pyrogauage and what does the pyro gauige

brice don't know squat! haha jk buddie:w2: