Ok guys i got a new head light switch today but thats not the problem. I check my fuse box and i got no power to 3 fuses wich are tail stop, horn and lights got no power. I check for bad fusible link with a tester and they are all good. Can any 1 give me a hand so i can fix this ploblem Please Thank You

 

check grounds

 

I did check the grounds. I got no horn no Lighs no stop lights

 

start by pulling out the light bulb connector on one of the headlights and check it for juice when you turn the headlight switch on. if you have juice but no lights, then either the bulbs are all bad (not likely at all) or you have no ground. if you dont have anything, then you have something inbetween the switch the wires themselves.

 

I got no juice going 2 the fuse in the fuse box

 

well there ya go. track down why. check a wiring diagram and check continuity from that 12v in on the fuse block to wherever it comes from. also check all plugs ive had stuff like that happen from an old plug seperating or something like that

 

Chilton book at autozone has a really good wiring diagram for your problem, if you want i can scan one out of my books and send it to you VIA email, just give me your email.

 

TAKING WIFE TO STORE, HIT A BUMP, WIFE ASKED "WHAT WAS THAT" I SAID " A HONDA


thats freaking hilarious

 

Thank u all for the help found the problem it was the wires that go down by the emergency brake and out the fire wall. Every time the emergency brake got set the wires were 2 close to it so they wore out and broke.