death wobble
Diesel Bomber
Joined: Aug 2007
Posts: 6,157
Likes: 371
From: TIKRIT, IRAQ
So far i have replaced both left and right tie-rods and a new sway bar and my truck still shakes. Correct me if im wrong should I take the hub off and check my main bearings. There is no frame cracks anywhere near the steering box. The only thing ive found is a part on my wheel and connects it to the upper a-arm is worn pretty bad you can tell when you jack the truck up idk if its the same part logan is talking about
Diesel Bomber
Joined: Jul 2009
Posts: 1,861
Likes: 86
From: Kingwood, WV
sounds like an upper ball joint to me... may be the culprit too. it takes alot of weight and all of the force from the suspension either way... you've already replaced both tie rods get the new upper ball joint, sounds like it may do the trick. and then get an alignment.
Diesel Bomber
Joined: Jul 2009
Posts: 1,861
Likes: 86
From: Kingwood, WV
4K? of 400K? if your goin thru a set of tires every 4,000 miles then you need every new part involved in the steering system and a alignment bad... as others have said previously; look for worn parts, replace what is bad and get an alignment
Thread
Thread Starter
Forum
Replies
Last Post
