head gasket
#11
the problem is that i can run well over 60psi before it has fully reved out i cant even think of holding it full throttle
---AutoMerged DoublePost---
you rotate it towards the block right? i already have the special wrench to get the bottom bolt
---AutoMerged DoublePost---
you rotate it towards the block right? i already have the special wrench to get the bottom bolt
Last edited by 1990cummins; 08-07-2009 at 10:55 AM. Reason: Automerged Doublepost
#13
#16
thats what i was going for they where both already wastegated but if i left them hooked up it would open at 15psi and that is no fun i am gonna get a boost controller to put inline to my wastegate so i can set it to open at a higher boost level, the exhaust housing on my stock turbo came from a hx35w from a second gen but either way the wastegate on the hx40 is the one i need to open
---AutoMerged DoublePost---
my stock h1c and a hx40 feeding that
---AutoMerged DoublePost---
my stock h1c and a hx40 feeding that
Last edited by 1990cummins; 08-07-2009 at 12:43 PM. Reason: Automerged Doublepost
#18
#20