92 1st gen steering problem
My 92 12v has a problem and I'm not sure exactly what it is. When I turn tr steering wheel to the left it shifts it into neutral it's a 4 speed auto someone let me know if they know what's going on I have not a clue
Look inside your engine bay by the firewall where the steering column comes through. The linkage from your shift lever travels down the column and hooks to some more linkage headed down to your transmission. If nothing is obvious have a friend turn the steering wheel while you watch it.
Good Luck!
Good Luck!
There are bushings in the column that support the steering shaft and the shift shaft that can fail. As RedChevy44 said, have some one turn the wheel while you watch. You'll see it flop around. Had a Ramcharger that would do that, it also wondered all over the road.
Look inside your engine bay by the firewall where the steering column comes through. The linkage from your shift lever travels down the column and hooks to some more linkage headed down to your transmission. If nothing is obvious have a friend turn the steering wheel while you watch it.
Good Luck!
Good Luck!
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
Feb 7, 2023 01:15 AM
Cdog121
1st Generation Dodge Cummins 89-93
6
Nov 16, 2015 01:49 PM



