electrical starting problem
#1
electrical starting problem
]hi i have a 95 3/4 ton cummins i have a wiring problem all i really know is when you turn the key it makes no attempt to turn over and it blows the ignition fuse every time. it was in an accident i bought it and fixed it up so i think maybe a pinched wire or one touching a ground the owner before me had a keyless start in it but when i bought it that was taken out any help would be apreciated. thanks
Last edited by chen; 05-07-2012 at 09:46 AM.
#4
Most automotive shops or trade schools will give you a wiring schematic for the truck..(had trouble with my A/C clutch before and a schematic helps A LOT) As for the remote start if it worked after it was taken out and didnt blow the fues im guessing they are in the right spot. I agree it does sound like the circut is grounded though.
Good luck
Good luck
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
moparman70
1st Generation Dodge Cummins 89-93
1
07-30-2015 12:38 AM