benched pump wont start
#11
ok sorry i havent posted this sooner. The problem was a shim fell out causing the plumger and barrel to bind together. Under the barrel are two horse shoe shaped shims when you bench the pump the bottom ones slide and fall out without you knowing. When you tighten the nuts back down it only has the top shim, causing the barell to get cocked in there. Also not all the shims are the same thickness some are .030in and some are .025in. Dont get them mixed up if they do fall out. It took us a wile to find that lost shim. So to anyone trying to bench there pump this all might be a good thing to keep in mind and watch out for.
Thread
Thread Starter
Forum
Replies
Last Post
Cavnar
Diesel In Distress - Support Ticket
3
09-09-2015 07:18 PM
Mac1997
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
07-13-2015 05:08 AM
ninetyoned250
1st Generation Dodge Cummins 89-93
3
03-01-2015 09:10 PM