Anyone heard of an allison swap?
#11
03-04-2012, 09:38 AM
Diesel Bomber
#13
03-05-2012, 11:59 AM
Diesel Bomber
#14
03-05-2012, 02:27 PM
The following users liked this post:
tiremann9669 (03-05-2012)
#15
03-05-2012, 03:22 PM
Diesel Bomber
The following 2 users liked this post by EasternAggie:
H.R.D (03-05-2012),
tiremann9669 (03-05-2012)
#16
03-06-2012, 07:45 AM
The 5 speeds are probably the easiest to swap in. Everything can be bought and thrown in. Adapter and controller.
The 6 speeds are a bit different. The 06 6 speed from the Duramax has a good computer to use as it doesn't use GM's new bus system between computers so you can use the tap shift without the need of having the BCM. Although the 06 6 speed, the internals are a tad weaker than the 07+ 6 speeds.
The 07+ 6 speed you can custom wire the TCM to work using a CAT TPS. Then you will just need EFI Live to modify the shift points and get rid of the torque management.
There is a whole thread on the swap over at 4btswaps.
Here is the link
The complete Allison 1000/2000/2400 info and swap guide thread
The 6 speeds are a bit different. The 06 6 speed from the Duramax has a good computer to use as it doesn't use GM's new bus system between computers so you can use the tap shift without the need of having the BCM. Although the 06 6 speed, the internals are a tad weaker than the 07+ 6 speeds.
The 07+ 6 speed you can custom wire the TCM to work using a CAT TPS. Then you will just need EFI Live to modify the shift points and get rid of the torque management.
There is a whole thread on the swap over at 4btswaps.
Here is the link
The complete Allison 1000/2000/2400 info and swap guide thread
The following users liked this post:
tiremann9669 (03-06-2012)
Thread
Thread Starter
Forum
Replies
Last Post
Murdock
Chevy/GMC Truck and Duramax Turbo Diesel Forum
3
04-12-2015 06:16 PM
