12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

Starting problems

Old Sep 15, 2011 | 10:51 AM
  #1  
95cummins4x4's Avatar
Thread Starter
|
Newbie
Joined: Aug 2011
Posts: 6
Likes: 0
From: bradenton
Default Starting problems

I went to start my truck this morning and it tried to turn over then immediatly quit and wouldnt even click when i turn it over my batteries are brand new and i tested them they have 13 volts so theyre good, i had a similar thing happen to me about a month ago because the previous owner installed a new starter but jimmy rigged the wires and one fell out so i got new connectors and tightned those down really good so thats not the problem either its not even making that distinct noise when you turn over the key im really lost any thoughts are appretiated i need it for work tommorow its a 95 4x4 c.t.d
thanks everyone
 
Reply
Old Sep 15, 2011 | 07:40 PM
  #2  
aguilar_15's Avatar
Diesel Enthusiast
Joined: Sep 2009
Posts: 343
Likes: 25
From: Stephenville, Texas
Default

I think its your batteries. Something isn't making a good contact or ground. Unless its the alt but I doubt it.
 
Reply
Old Sep 15, 2011 | 08:07 PM
  #3  
mylilpwny's Avatar
Diesel Enthusiast
Joined: Oct 2009
Posts: 200
Likes: 5
From: south oc cali
Default

check all connections .. never hurts to check multiple times ... might miss something only going over once ... have a similar prob in my 97 and it was my batt terminal were the wire splits to the starter .. bad connection inside .. i put new terminals on the cables and never had a problem again
 
Reply
Old Sep 15, 2011 | 10:04 PM
  #4  
95cummins4x4's Avatar
Thread Starter
|
Newbie
Joined: Aug 2011
Posts: 6
Likes: 0
From: bradenton
Default

i am gonna check every connection i don't think its the alternator it was driving fine left it over night went to start it and it clicked once then stopped and wouldn't make that noise when you turn over the key to start it i then tried to turn it over again and there was no usual noise i get when i turn the key over before i crank it up i just replaced batteries two weeks ago and battery cables and new terminals?? sucks hitching rides to work
 

Last edited by 95cummins4x4; Sep 15, 2011 at 10:08 PM. Reason: spelling
Reply
Old Sep 16, 2011 | 01:14 PM
  #5  
monster12valve's Avatar
Diesel Bomber
Joined: Sep 2009
Posts: 1,355
Likes: 47
From: willowick, ohio
Default

check the relay and fuses?
 
Reply
Old Sep 16, 2011 | 01:29 PM
  #6  
1AMatt's Avatar
Site Sponsor - 1aauto
Joined: Oct 2010
Posts: 1,514
Likes: 68
From: Pepperell, MA
Default

Try jumping the solenoid on the starter... That will at least tell you if your starter motor works or not! If it starts that way then start chasing wires
 
Reply
Old Sep 16, 2011 | 08:52 PM
  #7  
95cummins4x4's Avatar
Thread Starter
|
Newbie
Joined: Aug 2011
Posts: 6
Likes: 0
From: bradenton
Default

im new to this so how do i jump the solenoid in the starter??
 
Reply
Old Sep 16, 2011 | 09:43 PM
  #8  
aguilar_15's Avatar
Diesel Enthusiast
Joined: Sep 2009
Posts: 343
Likes: 25
From: Stephenville, Texas
Default

I think you just hook up the batteries to the starter terminals and see if it kicks out and rotates like it would if it were turning the engine over. I had this happen to me once and it turned out to be a fuse in the fuse box located in the engine bay. Can't remember the number but it should say on the lid which is the relay for the starter.
 
Reply
Old Sep 18, 2011 | 06:51 PM
  #9  
95cummins4x4's Avatar
Thread Starter
|
Newbie
Joined: Aug 2011
Posts: 6
Likes: 0
From: bradenton
Default

i jumped the starter i think it sparked then made a noise like it was working so i think one of the connections went bad
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dskewes14
12 Valve 2nd Gen Dodge Cummins 94-98
2
Sep 14, 2015 09:19 AM
GasItOut
12 Valve 2nd Gen Dodge Cummins 94-98
35
Jul 22, 2015 01:11 PM
hurriedcoyte
Diesel In Distress - Support Ticket
3
Jun 19, 2015 06:26 AM
JRB1960
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
Dec 1, 2014 09:24 PM
angies04
Ford Powerstroke 03-07 6.0L
1
Sep 29, 2014 04:11 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:41 AM.