No Speedometer! HELP
#1
No Speedometer! HELP
So i just finished taking my 97 12 valve motor/tranny/chassis and put on a 99 body using its interior and everything. I then bought a 98 12 valve wiring harness and have everything working but my speedo and headlights. I tried using the ABS sensor from the 97 and 99. So my question is why arent there any wires coming from my new harness to go to my tcase? And is that why i have no speedo? And what should i do? I'm all out of ideas and anything will help!
heres a pic just to show it off. check out the v10 on the door.
heres a pic just to show it off. check out the v10 on the door.
#3
#5
Re: No Speedometer! HELP
I have the 98 pcm as well. I've heard from a few people that it uses the ABS sensor in the rear end and the one on the tcase together fot the speedometer. I'm starting to think I have a 2wd harness on my 4wd. My next question is what wires do I need to rob from a 2wd auto harness to run to my tcase for the vss?
Sent from my LG-P999 using Tapatalk
Sent from my LG-P999 using Tapatalk
#7
Re: No Speedometer! HELP
Thanks riggle but I just got everything figured out. My wiring harness is set up for the 12v+ and the cab is the ground switch. I ended up just cutting the ground wire off my headlight and wiring it to the 20 amp headlight fuse and everything works how it should. I fixed my speedometer by hooking up the 99 ABS computer. Thanks for the help guys.
Sent from my LG-P999 using Tapatalk
Sent from my LG-P999 using Tapatalk
Thread
Thread Starter
Forum
Replies
Last Post
DirtyDiesel58
24 Valve 2nd Gen Dodge Cummins 98.5-02
18
09-27-2015 07:07 AM