Fuel plate
#11
#16
#17
I replaced my fuel plate with an aftermarket one and replaced the governor springs due to the fact that if you move the fuel plate too much and do nothing to the governor springs you will cause the engine to over rev and will destroy the engine or tranny. Be smart and fix both issues so you do not have to replace anything else.
I am running at around 407hp now and have had no other issues with my truck due to replacing the items with the correct parts and not just pulling them out or moving them.
I am running at around 407hp now and have had no other issues with my truck due to replacing the items with the correct parts and not just pulling them out or moving them.
#18
I replaced my fuel plate with an aftermarket one and replaced the governor springs due to the fact that if you move the fuel plate too much and do nothing to the governor springs you will cause the engine to over rev and will destroy the engine or tranny. Be smart and fix both issues so you do not have to replace anything else.
I am running at around 407hp now and have had no other issues with my truck due to replacing the items with the correct parts and not just pulling them out or moving them.
I am running at around 407hp now and have had no other issues with my truck due to replacing the items with the correct parts and not just pulling them out or moving them.
The following 4 users liked this post by BRE:
#19
Running no fuel plate will also cause your rack to hang........
O wait thats a myth
Guess the trucks we have running no plates should spin 10k rpm now....
Governor springs are NOT needed just because you moved your fuel plate. You can run no plate or 10, or 7 or 4, or 0.... Fuel plate DOES NOT control RPM....
O wait thats a myth
Guess the trucks we have running no plates should spin 10k rpm now....
Governor springs are NOT needed just because you moved your fuel plate. You can run no plate or 10, or 7 or 4, or 0.... Fuel plate DOES NOT control RPM....
The following users liked this post:
BRE (06-06-2011)
Thread
Thread Starter
Forum
Replies
Last Post
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:28 PM