can nv5600 out of o3 and new dodge work with my 96 dodge
#1
can nv5600 out of o3 and new dodge work with my 96 dodge
im bout to attempt a auto to standard swap over and so far have found an 03 dodge nv5600 for free with all tranny parts will it work in my 96 12 valve? i currently have an 47re in it i think..... anyway i have heard of some type of system coming off the p-pumps doin something to the tranny but idk.... have a freind who owes me and is helpin with the swap i need some guidance plz cause this is my ONLY truck and my daily driver but have done burnt up 3 auto trannys and am qiet tired off it plz help!!!!!!!!!!!!!
#2
it will work. does the nv5600 come with the T-case? if not u will need to get a t-case input that will work with the 5600. or an output shaft for the 5600. your rear drive shaft will need lenghtened and front will need shortened iirc. u will need the clutch pedal, hydro, flywheel, and clutch for a 5600.
#3
#4
#8
I put an 04.5 NV5600 in my 94.
Go to the wrecking yard and get a 2000-2002 transmission crossmember. It will have the provisions for the auto, 5 and 6 speed to mount. Its much bigger than the stock crossmember you have now, but bolts right in.
Use the 3rd gen plate on the transmission, and get a 5 speed mount. The auto mount may work, but I don't know. I had a 5 speed, so I just used that mount.
As far as the pump goes don't worry about it. You'll remove the throttle valve linkage from the pump to the transmission and remove the tps. Other than that the pump doesn't care what transmission is in it. The pumps were just different stock in relation to the transmission. 94/95 were 160hp auto 175hp 5 speed, 96-98 were 180hp auto 215hp 5 speed.
You may need to get a 5speed PCM or have yours flashed as a stick, without the auto it may get kinda ticked off........
You'll need to either swap the transmission harness for a manual transmission one or build the harness out to work with your new transmission. If you want reverse lights.......
Go to the wrecking yard and get a 2000-2002 transmission crossmember. It will have the provisions for the auto, 5 and 6 speed to mount. Its much bigger than the stock crossmember you have now, but bolts right in.
Use the 3rd gen plate on the transmission, and get a 5 speed mount. The auto mount may work, but I don't know. I had a 5 speed, so I just used that mount.
As far as the pump goes don't worry about it. You'll remove the throttle valve linkage from the pump to the transmission and remove the tps. Other than that the pump doesn't care what transmission is in it. The pumps were just different stock in relation to the transmission. 94/95 were 160hp auto 175hp 5 speed, 96-98 were 180hp auto 215hp 5 speed.
You may need to get a 5speed PCM or have yours flashed as a stick, without the auto it may get kinda ticked off........
You'll need to either swap the transmission harness for a manual transmission one or build the harness out to work with your new transmission. If you want reverse lights.......
#9