I Think I Know Whats Wrong, Help Me Confirm It Please
94-95 dodge ram(no idea what year yours is)fuel pressure according to cummins=18-24 psi at idle, 28-36 psi at 2000 rpm with no load. biodiesel seems to erode old fuel lines or where they seal or something i don't know since i never used any.
Last edited by 513yj; Oct 24, 2007 at 03:14 PM.
There are actually four "filters" in our fuel systems. I found this out this summer traking down the hard start demon. There is the main filter, the heater prescreen filter, a screen on the bottom of the pickup assembly in the tank and the secret screen i found inside the pick up assembly. I seperated the pickup assembly to check on the pick up tube condition and low and behold there was another screen on the pickup tube. So you may want to drop your tank and check the screens out due to the cleaning action of the bio.
Excellent. My 12V was used I cleaned the prefilter not long after getting the truck and it was as clean as a whistle. 


A lot of the times, the issues with 12Vs are usually stupid things like this.



A lot of the times, the issues with 12Vs are usually stupid things like this.
i cleaned mine @ 150K miles and it was clean as a whistle too.... that's after i put 70 K on it..... but i don't run bio.... all Number 2 for me.... well maybe some WMO from time to time.....
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
0
Mar 10, 2015 06:00 PM
cutthroatxxx
Ford Powerstroke 99-03 7.3L
0
Nov 16, 2014 09:11 PM
51Hudson
12 Valve 2nd Gen Dodge Cummins 94-98
3
Oct 30, 2014 10:34 PM



it runs fine now so I am happy



