Ive got a problem and need help!!
#11
#12
#13
I tryed putting that injector back in and torqued it and still the same o knock.... now im in the process off pulling the motor.....so we are about to see whats wrong... the first thing im gonna do is pull the head and check the top of the pistons and cylinders hoping to find something there...but im expecting something more like haymafia had... ill try to keep yall updated the best i can....
---AutoMerged DoublePost---
Thank yall so much O just wondering how hard is it to get the motor up high enough to clear the crossmember? It dont seem like there is enough height at the back lift point to clear it? Havent got there yet but just wondering?? Thank yall
---AutoMerged DoublePost---
Thank yall so much O just wondering how hard is it to get the motor up high enough to clear the crossmember? It dont seem like there is enough height at the back lift point to clear it? Havent got there yet but just wondering?? Thank yall
Last edited by dixieland1519; 03-28-2010 at 08:13 PM. Reason: Automerged Doublepost
#16
I tryed putting that injector back in and torqued it and still the same o knock.... now im in the process off pulling the motor.....so we are about to see whats wrong... the first thing im gonna do is pull the head and check the top of the pistons and cylinders hoping to find something there...but im expecting something more like haymafia had... ill try to keep yall updated the best i can....
---AutoMerged DoublePost---
Thank yall so much O just wondering how hard is it to get the motor up high enough to clear the crossmember? It dont seem like there is enough height at the back lift point to clear it? Havent got there yet but just wondering?? Thank yall
---AutoMerged DoublePost---
Thank yall so much O just wondering how hard is it to get the motor up high enough to clear the crossmember? It dont seem like there is enough height at the back lift point to clear it? Havent got there yet but just wondering?? Thank yall
#17
pulling the head off i hadnt even considered that...that would help out alot thanks buddy.. well i plan on going back with a new set of injectors this time i just dont kno what to go with...the guy at sdx said theyre injectors was on hold for some reason...
---AutoMerged DoublePost---
This old motor could use freshen up anyways so im gonna pull it out.... yea i had thought about pulling tha oil pan but wouldnt sure itd even clear then?....
---AutoMerged DoublePost---
This old motor could use freshen up anyways so im gonna pull it out.... yea i had thought about pulling tha oil pan but wouldnt sure itd even clear then?....
Last edited by dixieland1519; 03-29-2010 at 12:29 PM. Reason: Automerged Doublepost
#18
pulling the head off i hadnt even considered that...that would help out alot thanks buddy.. well i plan on going back with a new set of injectors this time i just dont kno what to go with...the guy at sdx said theyre injectors was on hold for some reason...
---AutoMerged DoublePost---
This old motor could use freshen up anyways so im gonna pull it out.... yea i had thought about pulling tha oil pan but wouldnt sure itd even clear then?....
---AutoMerged DoublePost---
This old motor could use freshen up anyways so im gonna pull it out.... yea i had thought about pulling tha oil pan but wouldnt sure itd even clear then?....
about droping the oil pan, I think it would give you the room you need but it would be a pain to get back on.
after you get the head off all thats left are 2 motor mounts and the bellhousing.
#19
Well i got my motor part off the way apart and so far we have found #4 piston oiler in the oil pan and the piston was scored.... it aint bad enough you can hang your fingernail in so im hoping that my block aint hurt.... but thats the only piston that i have out right now....tommorrow im gonna take the rest of them out and check them but they look fine looking at them in the block... man i wish that it was just a injector that had come apart
---AutoMerged DoublePost---
I tell ya what pulling the head is the only way to go it was easy!Thank you
---AutoMerged DoublePost---
I tell ya what pulling the head is the only way to go it was easy!Thank you
Last edited by dixieland1519; 03-30-2010 at 09:50 PM. Reason: Automerged Doublepost