12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

10 PSI of fuel pressure

Thread Tools
 
Search this Thread
 
  #11  
Old 11-26-2009, 11:48 PM
Hammer's Avatar
Diesel Wrench
Join Date: Mar 2007
Location: York,PA
Posts: 714
Received 87 Likes on 64 Posts
Default

Could be a weak OFV,but,since he says that it does not change with rpm increases I am going to say the factory lift pump is weak.
 
  #12  
Old 10-22-2010, 08:30 PM
Join Date: Apr 2009
Location: Milford, ky
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

Yea ID say it's the lift pump, mine was
 
  #13  
Old 10-22-2010, 08:48 PM
v8440's Avatar
Diesel Fan
Join Date: Oct 2010
Posts: 47
Likes: 0
Received 4 Likes on 4 Posts
Default

I figured my lift pump must be getting weak when my truck had about 260k on it. No reason, I just got ambitious and figured I'd put a new one in. It made my truck faster through weight reduction-it lightened my wallet. Absolutely ZERO difference other than that. Not that yours can't be weak, but I'd definitely suspect the overflow valve first. A 4 hour start time points to bad hoses, as you already know. If you continue to have trouble starting it after it sits for a while, the fuel heater might be leaking air in. Where the wires go into the heater sometimes will let air in enough to cause it to lose prime. I know that the truck was out of fuel, but I figured I'd put that out there just in case you still have some trouble getting it to start sometimes.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dbleo351
Chevy/GMC 6.2L and 6.5L
19
11-20-2016 09:34 AM
ctjkelley
Chevy/GMC 6.2L and 6.5L
7
06-03-2015 06:01 AM
robbyS
5.9 Liter CR Dodge Cummins 03-07
3
04-16-2015 02:22 PM
Mr.Gutsy
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
02-22-2015 11:11 PM
moneypitk5
Chevy/GMC 6.2L and 6.5L
3
02-12-2015 11:01 AM



Quick Reply: 10 PSI of fuel pressure



All times are GMT -5. The time now is 01:02 AM.