12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

Burnt out fixing the NV4500

Thread Tools
 
Search this Thread
 
  #1  
Old 11-18-2009, 04:40 PM
Overload's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2009
Location: Cincinnati, OH
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
Default Burnt out fixing the NV4500

Has anyone had any luck with installing over the road truck transmissions. Both my trucks are down now with this crappy nv4500 not pulling its weight. What are some simple transmissions used in larger trucks that do not incorporate weight savings, synthetic syncros, etc... I can apply air if needed, gear numbers do not matter but I need overdrive. Also need to know difficulty on 4x4 setup.
 
  #2  
Old 11-19-2009, 02:21 AM
dieseldocter16's Avatar
Diesel Wrench
Join Date: Aug 2008
Location: Schnecksville, Pa
Posts: 770
Received 19 Likes on 17 Posts
Default

If your installing something like a fuller or roadranger you're going to have to divorce mount the transfer case to keep 4x4. The one big advantage is that when you change the bell housing you can run a vocational clutch and you'll never slip it.
 
  #3  
Old 11-19-2009, 02:24 AM
stkdram55's Avatar
BOMBARDIER
Join Date: May 2008
Location: New Holland Ohio
Posts: 6,548
Received 279 Likes on 256 Posts
Default

what are you pulling that you keep breaking your tranny, 4500's are some stout tranny's. Maybe you need to look at upgrading to like a side kick or something along those lines...
 
  #4  
Old 11-19-2009, 02:42 AM
Uncle Bubba's Avatar
BOMBARDIER
Join Date: Mar 2007
Location: Illinois?
Posts: 12,854
Received 1,112 Likes on 700 Posts
Default

Go with this Torq King upgrade and you won't break em anymore. Gotta be some kind of issues goin on that your breakin the ones you have.

http://quad4x4.com/NV4500%20Rebuild%20Kits.htm

If all else fails the NV5600 will tow whatever loads you have and would be a much easier trade then the big truck trannies.
 
  #5  
Old 11-19-2009, 11:57 AM
Overload's Avatar
Diesel Fan
Thread Starter
Join Date: Jan 2009
Location: Cincinnati, OH
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
Default pulling? rockwell axles?

Pulling anything and everything, when I bought the truck I assumed it was up for the challenge, but im not on a 12 valve motor and about to put a 2.5 ton tranny and t case in it. Anyone done this? Also, how about using the rockwell axles, getting into a bit of work slappin those under the dodge?
 
  #6  
Old 11-19-2009, 12:52 PM
Uncle Bubba's Avatar
BOMBARDIER
Join Date: Mar 2007
Location: Illinois?
Posts: 12,854
Received 1,112 Likes on 700 Posts
Default

I pull 20,000 plus pretty regular with mine and up to 30,000 on occasion and other then the typical 5th gear thing that have I have since fixed this thing has never slipped a bit. Now if i were pullin that heavy through some heavy hills or mountains I would definitely go with NV5600. It has the same top and bottom gears just less of a range in the gears in between and ten time's as strong.

The NV4500 won't hold up to speed shifting, No clutch used stuff, but's that's the only real thing I've heard of that has broke these things.

Guess i also should have asked, any smoke how many miles on the motor or any other symptoms through all this.
 

Last edited by Uncle Bubba; 11-19-2009 at 12:59 PM.
  #7  
Old 11-19-2009, 03:00 PM
12.valve.hauler's Avatar
Diesel Enthusiast
Join Date: Jul 2009
Location: frankfort, KY
Posts: 213
Received 4 Likes on 4 Posts
Default

whats a vocational clutch???
 
  #8  
Old 11-19-2009, 03:43 PM
Jet A Fuel's Avatar
Diesel Bomber
Join Date: Aug 2009
Location: Georgia
Posts: 1,981
Received 347 Likes on 309 Posts
Default

I agree with Uncle Bubba.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
taweste
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
09-10-2015 09:16 PM
Robert hawkins
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
02-23-2015 08:06 AM
dezeldoc
Wanted To Buy (WTB) - Used
3
01-04-2015 11:12 PM
CumminsMan2.0
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
12-11-2014 04:57 AM
GreenDieselF
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
11-09-2014 07:18 PM



Quick Reply: Burnt out fixing the NV4500



All times are GMT -5. The time now is 04:24 AM.