banjo bolt
Thread Starter
|
Diesel Fan
Joined: Oct 2009
Posts: 79
Likes: 3
From: South Dakota
banjo bolt
I stripped the banjo bolt (10mm) on my 96 cummins. anybody know where to get a replacement?
also I ran my feed line into a 2 liter bottle of fuel and rigged a bypass for the pre heater so my feed line ran directly into the fuel pump. still had alot of air...could the lift pump be sucking air anywhere?
also I ran my feed line into a 2 liter bottle of fuel and rigged a bypass for the pre heater so my feed line ran directly into the fuel pump. still had alot of air...could the lift pump be sucking air anywhere?
Diesel Enthusiast
Joined: May 2008
Posts: 200
Likes: 3
From: san diego california
Diesel Enthusiast
Joined: Oct 2008
Posts: 209
Likes: 15
Thread Starter
|
Diesel Fan
Joined: Oct 2009
Posts: 79
Likes: 3
From: South Dakota
cool thx...Genos are for 98.5 + not sure about the vulcans .. from what I have read the ones from geno will not work for sure. My bro inlaw works at a machine shop and offered to drill and tap the old one. I will order a new lift pump monday so whether i order one or have mine tapped doesnt matter as long as I have all my parts together on the same day. If I had the time and money I would replace every line on the truck but for now I just want her ready for winter.
Thread
Thread Starter
Forum
Replies
Last Post
Alfred Bruce Millett
12 Valve 2nd Gen Dodge Cummins 94-98
7
Apr 3, 2015 01:45 AM
NiNjAassasin545
12 Valve 2nd Gen Dodge Cummins 94-98
0
Dec 2, 2014 11:40 PM
