Trans Temp Gauge Help
... next .. drilling for the egt
BOMBARDIER
Joined: Mar 2007
Posts: 23,293
Likes: 1,322
From: North of You
Looks like this:
DieselManor - Dodge Generation 3 Cooler Line
Your 97 may or may not have it because for some stupid reason they quit putting this line in - I thought in model year 1996.
No worries though, if you dont have that line from the factory, you can still put it in with this:
Cooler Line Manifolds at DieselManor
And if hat doesnt tickle your fancy, you can use this in the pan - you install this in the side of the pan and screw your temp sender right into it:
http://www.genosgarage.com/prodinfo.asp?number=BM-80250
DieselManor - Dodge Generation 3 Cooler Line
Your 97 may or may not have it because for some stupid reason they quit putting this line in - I thought in model year 1996.
No worries though, if you dont have that line from the factory, you can still put it in with this:
Cooler Line Manifolds at DieselManor
And if hat doesnt tickle your fancy, you can use this in the pan - you install this in the side of the pan and screw your temp sender right into it:
http://www.genosgarage.com/prodinfo.asp?number=BM-80250
Diesel Bomber
Joined: Jul 2009
Posts: 1,861
Likes: 86
From: Kingwood, WV
Looks like this:
DieselManor - Dodge Generation 3 Cooler Line
Your 97 may or may not have it because for some stupid reason they quit putting this line in - I thought in model year 1996.
No worries though, if you dont have that line from the factory, you can still put it in with this:
Cooler Line Manifolds at DieselManor
And if hat doesnt tickle your fancy, you can use this in the pan - you install this in the side of the pan and screw your temp sender right into it:
http://www.genosgarage.com/prodinfo.asp?number=BM-80250
DieselManor - Dodge Generation 3 Cooler Line
Your 97 may or may not have it because for some stupid reason they quit putting this line in - I thought in model year 1996.
No worries though, if you dont have that line from the factory, you can still put it in with this:
Cooler Line Manifolds at DieselManor
And if hat doesnt tickle your fancy, you can use this in the pan - you install this in the side of the pan and screw your temp sender right into it:
http://www.genosgarage.com/prodinfo.asp?number=BM-80250
Newbie
Joined: Oct 2009
Posts: 7
Likes: 0
i did think of that as we just got done replacing the lines on our 98. the ones listed for the 98 were wrong; the ones for the 97 had the port you guys are talking about on the scematic; but not on the physical line itself. so 96 is probably the safer bet that they stopped using this design
Thread
Thread Starter
Forum
Replies
Last Post
JDurks2
24 Valve 2nd Gen Dodge Cummins 98.5-02
16
Jun 7, 2015 08:57 PM
