Cummins power pricings...
#1
Cummins power pricings...
hey everyone im pretty new to DB and im new to diesels so here goes... first off how much power can you get out of a p7100 pump? also im wondering how much money it will cost to get to about 600 hp on a 12 valve? and thats everything too from if i need performance injectors and intake and turbo and an aftermarket fuel plate etc... i have a 94 dodge 2500 4x4 5 speed... thanks for any help guys i really appreciate it!
#2
#4
ok so say i got a fuel plate (and i dont know which ones give you the best power but i'd get the one that gives you the best power) changed that out, adjusted the starwheel for peak power, and adjusted the timing to maybe 16 and of course had it straight piped with dual stacks what do you think i'd be running for power? and for everything individually (fuel plate, turbo, intake, etc.) how much are you all thinking for $$$?
#9
#10
hey everyone im pretty new to DB and im new to diesels so here goes
first off how much power can you get out of a p7100 pump?
also im wondering how much money it will cost to get to about 600 hp on a 12 valve?
94 dodge 2500 4x4 5 speed
Keep in mind though you will need to decide on what you plan on using the truck to do along with the power you seek.To make a 600hp daily driver in a 12v means the proper charger choice and selection.Once you cross the 500hp mark with a 12v they will tend to get a tad smoky and you will need to keep that in mind as you want to limit the excessive smoke.For a good daily driving 600hp 12v then I would recomend a set of twins as the big singles will not clean up what you need for fuel to make the power you want......Andy