are you saying 25-30 psi constant boost? or when you floor it? because im only getting to 20 psi when i floor it

 

Boost Guage:




Pyrometer:

 

THankS DR. EVIL I GOTTEM IN THE RIGHT SPOTS

 

 

that would be because your wastgate is opening like its suposed to get a boost elbow and you can make more boost

 

WELL I DID PUT THE FITTING IN THAT CAME WITH THE PLATE ;;;; ITS RESTRICTED MORE THEN TE ORIGINAL IS THIS THE SAME AS THAT BOOST ELBOW?

 

yeah but not as good.just as a test take the line off that goes to the actuator and plug it and see what you get.don't let it go over 40psi even if it wants to.and i mean when you floor it not cruising.

 

ill try that test,,,, if it works can i leave it like that?

i had another issue i tried moving my #100 full forward and my afc would not go back on
has any one experienced this? when we all say full forward im under the impresion that itis all the way forward,,, right until it touches the front bottom half of the afc. i need schooling again some one school me

 

leave the plate just loose enough that it will still move then put it foreward and make the afc push the plate back as you put it on,that take it back off and tighten the plate.and yes you can leave the wastegate plugged,but i would just get an elbow and set it where you want it.

 

does the plate touch against the other side when its full forward??????????????