throttle valve cable
#4
#7
#9
i talked to Dave Goerend of Goerend Transmission Incorporated 3 years ago when i bought my tranny from him. he said when the throttle is at WOT (Wide Open Throttle), AKA pedal to the metal, full tilt boogie, full throttle, etc, the cable should be pulled taught. there is a lever it is connected to on the tranny where the shift linkage is at. with the motor off, the accelerator pedal to the floor (make sure no floor mats are in the way) get under the truck and make sure this lever is tight and can not be moved. have the person inside the cab slowly depress the pedal so you can actually see the cable and lever move.
hope this helps.
hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
Bill in Ballard
Ford 83-94 6.9 and 7.3L General
3
03-13-2016 07:42 PM
Andyhc1
12 Valve 2nd Gen Dodge Cummins 94-98
3
03-16-2015 12:00 PM
bonestock
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
02-01-2015 08:41 PM
1stgenswap
1st Generation Dodge Cummins 89-93
2
11-03-2014 09:45 PM