you can get on ebay and get you a $20.00 boost controller.

 

o that sounds like a good idea

 

Did you bypass the waste gate? Or like completely block it off? Because if you just pinch the line a little it should make anywhere from 15-30 lbs or so. Mines completely blocked off and I can only reach 37 WFO.

 

no i'm still hooked up to the wastegate, i bought the adjustable BD boost elbow

 

Do you ever plan to upgrade to somthing bigger?

 

have you tried to adjust the elbow to lower your boost?

 

mine hits 38 to 40 lbs and i have to try hard to make it hit 1100 degrees usually at that boost level its 950 to 1050 but then im shifting cause i dont have a gsk. i think you can manualy adjust the wastegate on the trubo so you dont make as much boost but i could be wrong

 

if you've got an adjustable elbow why don't you adjust it down some?

---AutoMerged DoublePost---

a 2nd gen.cummins factory turbo/waste gate is not adjustable!

 

i adjusted it all the way down and now i'm hitting 42lbs. thanks for the info

 

you cant put a boost controller on a 12v there mechanical engines