Waste Gate Adjustment
#1
Waste Gate Adjustment
I am kinda lazy and don't feel like walking into my barn to get my manual, so i figured i would do the next best thing and ask you guys, how do i adjust my waste gate, i dont want to let off the skinny pedal so quick, i spool right up to 40psi and i know thats not gooood. any suggestions or tips would be very helpful.
#2
the only thing you can do is get an aftermarket adjustable waste gate actuator.you could get a boost controller,or boost elbow(basicaly the same thing),or cut back on the fuel you givin it.but personaly i wouldn't do that.i'd go with the actuator.i havn't actually used one myself but i know people who have.
#3
#4
#5
#6
i am only 21 and have the worst memory, thats why i write everything down. im going to mess with it tomorrow. i found a 60psi gauge in my basement that i am going to utalize! i also noticed today that the hose off the elbo on the compresser housing is filled with silicone. I am going to just cut it off and see if that helps with the psi. BTW I sent the plate out this morning.
Thread
Thread Starter
Forum
Replies
Last Post
vin_diesel
Alternative Fuels , Additives , Fluids
1
03-01-2016 01:43 PM
carid
Diesel Bombers Sponsors
0
01-19-2015 08:30 AM