Why?

Reply Subscribe

Thread Tools

Search this Thread

Mar 22, 2009 | 09:52 AM

smokedout

Thread Starter

Diesel Enthusiast

Joined: Dec 2008

Posts: 286

Likes: 1

From: cumby,TX

Why?

Why does everybody say move your AFC housing all the forward when there is 4 holes for the bolts to go in with no slots to adjust.Plz somebody tell me!

Mar 22, 2009 | 09:59 AM

oglejust

Diesel Wrench

Joined: Oct 2008

Posts: 556

Likes: 19

From: paris illinois

there r slots.... not very big 1's but there r slots

Mar 22, 2009 | 10:04 AM

392hemix

Diesel Wrench

Joined: Feb 2009

Posts: 528

Likes: 10

From: New Hampshire

Ya, you just need to take it apart, it does not lool like it moves till you take her apart. then you will see slots and if its full forward with the plate full forward watch the black smoke poor out

Mar 22, 2009 | 12:12 PM

smokedout

Thread Starter

Diesel Enthusiast

Joined: Dec 2008

Posts: 286

Likes: 1

From: cumby,TX

Right where u un-bolt to slide the plate forward,is that what u mean by taking it apart?

Mar 22, 2009 | 01:02 PM

ykdave

Diesel Enthusiast

Joined: Feb 2008

Posts: 108

Likes: 8

their are slots in the AFC housing (the 4 bolts that hold it to the pump). They are very short slots, not much more than the width of the bolt! But it doesnt need alot of movement on the AFC to make a big change.