Why?
 

Why does everybody say move your AFC housing all the forward when there is 4 holes for the bolts to go in with no slots to adjust.Plz somebody tell me!

there r slots.... not very big 1's but there r slots

Ya, you just need to take it apart, it does not lool like it moves till you take her apart. then you will see slots and if its full forward with the plate full forward watch the black smoke poor out:pca1:

Right where u un-bolt to slide the plate forward,is that what u mean by taking it apart?

their are slots in the AFC housing (the 4 bolts that hold it to the pump). They are very short slots, not much more than the width of the bolt! But it doesnt need alot of movement on the AFC to make a big change.

you have to remember 1mm of rack travel makes a big difference

thnx, I already did it and didnt notice.

slide your plate too, then you will notice it should smoke like a fraight train:rocking: