Diesel Bombers

12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

Why?

Thread Tools
 
Search this Thread
 
  #1  
Old 03-22-2009, 09:52 AM
smokedout's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Dec 2008
Location: cumby,TX
Posts: 286
Received 1 Like on 1 Post
Default Why?
Why does everybody say move your AFC housing all the forward when there is 4 holes for the bolts to go in with no slots to adjust.Plz somebody tell me!
 
Reply Like
  #2  
Old 03-22-2009, 09:59 AM
oglejust's Avatar
Diesel Wrench
Join Date: Oct 2008
Location: paris illinois
Posts: 556
Received 19 Likes on 19 Posts
Default
there r slots.... not very big 1's but there r slots
 
Reply Like
The following users liked this post:
smokedout (03-22-2009)
  #3  
Old 03-22-2009, 10:04 AM
392hemix's Avatar
Diesel Wrench
Join Date: Feb 2009
Location: New Hampshire
Posts: 528
Received 10 Likes on 10 Posts
Default
Ya, you just need to take it apart, it does not lool like it moves till you take her apart. then you will see slots and if its full forward with the plate full forward watch the black smoke poor out
 
Reply Like
The following users liked this post:
smokedout (03-22-2009)
  #4  
Old 03-22-2009, 12:12 PM
smokedout's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Dec 2008
Location: cumby,TX
Posts: 286
Received 1 Like on 1 Post
Default
Right where u un-bolt to slide the plate forward,is that what u mean by taking it apart?
 
Reply Like
  #5  
Old 03-22-2009, 01:02 PM
ykdave's Avatar
Diesel Enthusiast
Join Date: Feb 2008
Posts: 108
Likes: 0
Received 8 Likes on 6 Posts
Default
their are slots in the AFC housing (the 4 bolts that hold it to the pump). They are very short slots, not much more than the width of the bolt! But it doesnt need alot of movement on the AFC to make a big change.
 
Reply Like
The following users liked this post:
smokedout (03-22-2009)
  #6  
Old 03-22-2009, 01:11 PM
94 12valve's Avatar
Diesel Bomber
Join Date: Jan 2009
Location: Pylesville, Maryland
Posts: 3,504
Received 157 Likes on 142 Posts
Default
you have to remember 1mm of rack travel makes a big difference
 
Reply Like
The following users liked this post:
smokedout (03-22-2009)
  #7  
Old 03-22-2009, 01:23 PM
smokedout's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Dec 2008
Location: cumby,TX
Posts: 286
Received 1 Like on 1 Post
Default
thnx, I already did it and didnt notice.
 
Reply Like
  #8  
Old 03-23-2009, 11:16 AM
392hemix's Avatar
Diesel Wrench
Join Date: Feb 2009
Location: New Hampshire
Posts: 528
Received 10 Likes on 10 Posts
Default
slide your plate too, then you will notice it should smoke like a fraight train
 
Reply Like
Back to Subforum
12 Valve 2nd Gen Dodge Cummins 94-98
View Next Unread
tranny temp. or fuel pressure?




Advanced Search

All times are GMT -5. The time now is 10:33 PM.