future upgrades
#1
future upgrades
im looking in doing some upgrades, im gettin a little money back from taxes,and ive been researching, i have a stock truck other then the tranny has been done already, and ive replaced all the fuel lines to the injection pump.i plan on puttin a #100 fuel plate in it and tune the afc and a 3000 gsk.and im building a custom air intake,my question is does anyone have any suggestions or nono's in what i should do or dont
#4
#5
If you plan to exceed 3200rpm you need hd valve springs. i was running the 4k for over a year with stock valve springs and didnt have an issue, untill i got my exhaust-brake installed
#9
ill probally just go with the 3000 gsk im not looking to make alot of power just run better its gutless,its a stock turbo its a hx35w but i have took it off because i have been told its suppose to be wastegated but there is no place for it on the turbo the only thing i figure is the original owner changed the housing. the torque converter i guess is a stock style im guessing all i know its black with bd power stamped on it with yellow letters.
---AutoMerged DoublePost---
opps i forgot the killer dowel pin fell out about a 2yrs ago and caused the timing cause to crack i welded it and put the tab kit in it but lucky there was no damage to any of the gears.
---AutoMerged DoublePost---
opps i forgot the killer dowel pin fell out about a 2yrs ago and caused the timing cause to crack i welded it and put the tab kit in it but lucky there was no damage to any of the gears.
Last edited by dodgeman129; 02-09-2009 at 11:23 AM. Reason: Automerged Doublepost