47re Won't shift at wot
#1
47re Won't shift at wot
I am wondering why it will not shift at wot. If I leave off a tad it will shift perfect through all the gears.
I was searching this for awhile and came up with some questions.
I am still wondering what does the tps actually control? Why does it have to be at 1-1.2 at idle and 2.2-2.9 at wot? ( I do have a standalone ats valve body and can check what the low & high settings are).
Does the tv cable actually change the upshift? I did find out it is also a kickdown cable if I am right.
I am tring to figure out if my problem is in the standalone or the adjustments on my linkage.
thanks
I was searching this for awhile and came up with some questions.
I am still wondering what does the tps actually control? Why does it have to be at 1-1.2 at idle and 2.2-2.9 at wot? ( I do have a standalone ats valve body and can check what the low & high settings are).
Does the tv cable actually change the upshift? I did find out it is also a kickdown cable if I am right.
I am tring to figure out if my problem is in the standalone or the adjustments on my linkage.
thanks
#2
#3
#8
doubt its tv adjustment, i have been adjusting mine for awile and cannot see this causing the concern. tv mainly influences 1-2, 2-1, 2-3, 3-2 shifts with gov press. then the tp influences only 3-4, 4-3 and lock-up functions with tv & gov press. if you dont shift at wot cause of tv it would upshift late and hard at part throttle too. i may be wrong and im starting a new thread on my tv prob.
#9
#10
doubt its tv adjustment, i have been adjusting mine for awile and cannot see this causing the concern. tv mainly influences 1-2, 2-1, 2-3, 3-2 shifts with gov press. then the tp influences only 3-4, 4-3 and lock-up functions with tv & gov press. if you dont shift at wot cause of tv it would upshift late and hard at part throttle too. i may be wrong and im starting a new thread on my tv prob.
Maybe I will keep the tv cable a little loose and see what happens.
Thread
Thread Starter
Forum
Replies
Last Post
jrock0805
12 Valve 2nd Gen Dodge Cummins 94-98
6
07-28-2015 02:03 PM