Won't go into Park
#3
Your pawl is not engaging in the transmission. Is this the first time you have had this happen? If it worked alright before, did you notice the truck was still able to move a little after you put into park, If so the pawl may be worn out. See if the truck will move a little, and then try to put it into park. Do this at home, as it may stick in park then. If it does you may have to roll the truck back and forth a little to get it to disengage
Last edited by PEKOKITTY; 05-16-2019 at 09:01 PM. Reason: more questions
#6
Another thing to check would be your u-joints. Anything that would let the drive shaft move the main shaft in the trans, on which the locking ring is on, will not let the pawl drop in place. Everything needs to be straight and in line for the pawl to engage. A little play is alright, but to much will throw the notches and the pawl out of line
Last edited by PEKOKITTY; 05-21-2019 at 12:56 PM. Reason: add more
Thread
Thread Starter
Forum
Replies
Last Post
SRTcummins
24 Valve 2nd Gen Dodge Cummins 98.5-02
3
03-27-2013 11:10 AM