Coolant bypass

Reply Subscribe

Thread Tools

Search this Thread

Oct 23, 2014 | 03:23 PM

#11

4x4manonbroke

Diesel Bomber

Joined: Jun 2010

Posts: 3,202

Likes: 143

From: Tacoma

Quote:

Originally Posted by 94 12valve

The bypass relieves excessive pressure being built up, so you would want to use a pressure valve not another thermostat valve.

If you are worried about it on a hot street truck personally I would pull your current thermostat and drill three 1/8" holes in it.

This is what I do to most of the T-stats .. just for safty and helps to burp system also

Oct 26, 2014 | 01:23 PM

#12

JustAnother_cummins_guy

Thread Starter

Diesel Fan

Joined: Oct 2014

Posts: 14

Likes: 0

Quote:

Originally Posted by 4x4manonbroke

This is what I do to most of the T-stats .. just for safty and helps to burp system also

That's the same thing guys do to stop the massive temperature drop when the tstat opens isn't it because mine will get to 190 and drop off to about 150 to 160 and then stay steady at about 180

Last edited by JustAnother_cummins_guy; Oct 26, 2014 at 01:26 PM.

Oct 28, 2014 | 07:52 PM

#13

4x4manonbroke

Diesel Bomber

Joined: Jun 2010

Posts: 3,202

Likes: 143

From: Tacoma

Quote:

Originally Posted by JustAnother_cummins_guy

That's the same thing guys do to stop the massive temperature drop when the tstat opens isn't it because mine will get to 190 and drop off to about 150 to 160 and then stay steady at about 180

Mine will still go to 200* then drop to 130 .. first time .. then levels off after that .. typically stays in the 180-190* area when driving Freeway ( 1750 RPM'S ) ..