ok i just drove my cousin's 750hp 2003 24v and it is bad a$$!! so i want to make my 95 12v the same but its gonna take some time first of all i want to get straight is the tranny. mine now has a precision triple disk converter transgo shift kit and extra clutches. i know im gonna need a 5 disk converter (im thinking suncoast), billet flexplate, and billet shafts. what am i missing for the tranny? for the motor i know head gasket(what kind? and best place to buy one?) headstuds and valuve springs(what poundage?) i already have the turbo lined up im gonna use my s300 62/65/13 over a s400 probably a 76/90 or something like that. but im not sure how to get that much fuel. any ideas for me? thanks!

 

 

yea im actually considering this

 

take the pump off give it to a shop and tell them what you want. you will need a big fuel system you will need 5x16's + for injectors

 

yeah would also get a beefy driveline built to transmit al that power to the ground ... gonna want some cromemoly axles, ..... as far as the HG go with a stock unit from cummins and go with 14MM studs - do this before you even start with mods.... get a good manifold and a 5" exhaust.. I have one on my truck its Diamond eye Straight piped ... sounds awesome .... good luck ... will be keeping my eyes peeled on this one

 

its gonna be while im just getting some ideas now on what i need so i can start stocking up

 

 

no need for 14mm studs the 12mm will work just fine. while you have the head off get it o ringed, a good set of valve springs, a good vlave jod and mild porting if you can afford it.

The rest is pretty easy just do a good search and you will find the info you need.