750hp build
 

ok i just drove my cousin's 750hp 2003 24v and it is bad a$$!! so i want to make my 95 12v the same but its gonna take some time first of all i want to get straight is the tranny. mine now has a precision triple disk converter transgo shift kit and extra clutches. i know im gonna need a 5 disk converter (im thinking suncoast), billet flexplate, and billet shafts. what am i missing for the tranny? for the motor i know head gasket(what kind? and best place to buy one?) headstuds and valuve springs(what poundage?) i already have the turbo lined up im gonna use my s300 62/65/13 over a s400 probably a 76/90 or something like that. but im not sure how to get that much fuel. any ideas for me? thanks!

:pca1:

yea im actually considering this lol

take the pump off give it to a shop and tell them what you want. you will need a big fuel system you will need 5x16's + for injectors

yeah would also get a beefy driveline built to transmit al that power to the ground ... gonna want some cromemoly axles, ..... as far as the HG go with a stock unit from cummins and go with 14MM studs - do this before you even start with mods.... get a good manifold and a 5" exhaust.. I have one on my truck its Diamond eye Straight piped ... sounds awesome :rocking:.... good luck ... will be keeping my eyes peeled on this one :pca1:

its gonna be while im just getting some ideas now on what i need so i can start stocking up lol :rocking:

:pca1:

no need for 14mm studs the 12mm will work just fine. while you have the head off get it o ringed, a good set of valve springs, a good vlave jod and mild porting if you can afford it.

The rest is pretty easy just do a good search and you will find the info you need.