12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

Oil in my intake tube?

Thread Tools
 
Search this Thread
 
  #11  
Old 06-29-2013, 10:24 PM
RanchhandTCR's Avatar
Diesel Bomber
Join Date: Sep 2011
Location: SLV Colorado
Posts: 2,049
Received 114 Likes on 106 Posts
Default

Well my guess of it costing as much as a new turbo was wrong, its 100-150 for the kit, and it takes 2-4 hours to rebuild at $80 an hour (Assuming) So thats not to bad, as long as the exhaust and compressor housings are ok.
 
  #12  
Old 06-30-2013, 12:30 AM
sweetv8s10's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Nov 2009
Location: El Dorado Springs MO
Posts: 498
Likes: 0
Received 20 Likes on 16 Posts
Default

I think everything is ok it's just leaking some oil but not making any noise so I figured I better do it asap.
 
  #13  
Old 06-30-2013, 07:59 AM
BBD Tech Support's Avatar
Diesel Bombers Sponsor
Join Date: Jul 2010
Location: Lexington SC
Posts: 158
Received 16 Likes on 16 Posts
Default

Believe this or not a dirty air filter (almost clogged) can cause oil in the intake side of the turbo. Most liking not your problem if you have a lot in there. Also be careful a bad turbo leaking oil can cause run-away.
 
  #14  
Old 06-30-2013, 08:12 AM
diesel pap's Avatar
Site Sponsor - Mighty Diesel
Join Date: Dec 2008
Location: West Virginia
Posts: 4,184
Received 213 Likes on 200 Posts
Default

oil leaking into the intercooler is very bad. like has been said can cause a runaway and the only way to stop it is shut off supply off. knowing what i know now i would not drive one like that. very good chance of scattering the motor.
 
  #15  
Old 06-30-2013, 10:55 PM
sweetv8s10's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Nov 2009
Location: El Dorado Springs MO
Posts: 498
Likes: 0
Received 20 Likes on 16 Posts
Default

Will the intercooler come out without unhooking the ac condenser and what would be the best thing to use to clean the intercooler?
 
  #16  
Old 07-01-2013, 11:07 AM
tiremann9669's Avatar
Diesel Bomber
Join Date: Mar 2010
Location: Dansville NY
Posts: 4,233
Received 434 Likes on 356 Posts
Default

Not sure on the condenser but the best way to clean it is soak it in hot water with Dawn dish soap, keep rinsing with hot water and resoaking with fresh soap till it's clean. Some will say any dish soap will work but don't buy into that, try washing greasy hands with the other brand, then try dawn and you'll see what I mean. The bathtub is good for soaking your intercooler if it dosn't get you killed
 
  #17  
Old 07-01-2013, 10:04 PM
RanchhandTCR's Avatar
Diesel Bomber
Join Date: Sep 2011
Location: SLV Colorado
Posts: 2,049
Received 114 Likes on 106 Posts
Default

you should be able to pull the intercooler out of the way if you remove the top support.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
|WYG|SS
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
08-19-2015 10:53 AM
soco
Ford 83-94 6.9 and 7.3L General
1
07-27-2015 06:06 PM
young grease monkey
Chevy/GMC 6.2L and 6.5L
3
07-25-2015 03:46 PM
LTreis702
Chevy/GMC 6.2L and 6.5L
4
02-14-2015 12:52 PM
12Valvepower01
12 Valve 2nd Gen Dodge Cummins 94-98
30
11-11-2014 10:52 AM



Quick Reply: Oil in my intake tube?



All times are GMT -5. The time now is 08:02 AM.