STALLS IN REVERSE
#1
STALLS IN REVERSE
Hey guys on my 1996 Dodge I am having a problem in reverse. Whenever I put it into reverse the truck starts dropping rpms, and if I dont let off of the brake it will die. The idle is set at 850RPM and I adjusted the TPS today to sit at 1.3 volts at idle. Just wondering if anyone has any input on this.
#2
Is the idle set with the dash tach or with a plug in to the computer?
There is a TSB telling you not to use the dash tach. Ram Diesel Problems
Also did you set it with the A/C on?
1994-1998 with AT - in drive with AC on 750-800 RPM
1994-1998 with manual in neutral with AC on 750-800 RPM
NOTE: These speeds may cause stalling when the engine is cold. If this is a problem for you, bump the idle speed to 900 RPM.
Also See: https://www.dieselbombers.com/94-98-...djustment.html
There is a TSB telling you not to use the dash tach. Ram Diesel Problems
Also did you set it with the A/C on?
1994-1998 with AT - in drive with AC on 750-800 RPM
1994-1998 with manual in neutral with AC on 750-800 RPM
NOTE: These speeds may cause stalling when the engine is cold. If this is a problem for you, bump the idle speed to 900 RPM.
Also See: https://www.dieselbombers.com/94-98-...djustment.html
Thread
Thread Starter
Forum
Replies
Last Post
alexcummins2341
5.9 Liter CR Dodge Cummins 03-07
3
07-31-2015 11:21 PM
redjello
12 Valve 2nd Gen Dodge Cummins 94-98
0
04-13-2015 08:27 PM
99&91cummins
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
02-28-2015 09:28 AM